Add a touch of character on any metal surface with these button magnets. Available in 1-packs or 10-packs, these rectangle magnets feature a metal shell front with a magnetic backing. On the front, where your custom design goes, you’ll find a clear mylar/UV cover that protects against fading and scratches.
.: Metal shell with flat, magnetic backing
.: One size (2″ x 3″) (5.1 x 7.6cm)
.: Clear mylar/UV cover for fading and scratch protection
.: Available in 1 an 10 pieces
Additional information
Weight
N/A
S
M
L
XL
2XL
3XL
4XL
5XL
Width, in
17.99
20.00
21.97
23.98
25.98
27.99
30.04
31.97
Length, in
28.50
29.49
30.51
31.50
32.52
33.50
34.49
35.51
Sleeve length, in
7.24
7.76
8.23
8.74
9.25
9.76
10.24
10.75
This size guide shows product measurements taken when products are laid flat. Actual product measurements may vary by up to 1".
Print files guideline
Upload files in JPG and PNG formats with at least 150 dpi
For the best printing performance, make sure you upload images with at least 150 dpi. We recommend using PNG because of its transparent background.
Make your design with the sRGB color profile
The color might be effected when converted to CMYK color profile which is used for printing. For the best accuracy, we suggest that you convert the print file to sRGB color profile in your design software.
Design and refer to the recommend size for each canvas
We now don't support the product templates for designing on your side. Make sure that print files have at least 150 dpi after eidting.
Design tips
Safe print & Stitching area
Safe print area
Keep all your designs are in the safe print area, in case your designs will be lost during production.
Stitching area
This area will be stitched during production. Please make sure your designs are not in this place.
Get all print area covered
Use full-bleed images
Any space that isn't covered by designs will show the bare fabric, which may destroy the design.
Don.t try to match designs across adjacent canvas
Even though you match designs across adjacent canvas perfectly on mockup or our 3D model, it's not possible to achieve the perfect design on the finished product.
Logo Safety Area
It refers to an area to keep your logo which will be printed complete on the apparels, especially some neck labels which are near the stitching area.Click Gridlines button and see some little squares, keep your logo at least one square height away from the black line, then, your logo is in the safety area.
Notice
Our all over print clothes are printed on white garments basically. If you want to design on different color, you can change the layer background color.
All over print products always have non-printed parts. Non-printed surfaces will remain blank. So please take this into consideration when you are designing.
We will try to optimize our algorithm continuously. But we can't gurantee exact placement on the finished products. Print placement varies depending on garment size.
If customers place an order at DPP, but the product is out of stock and we haven't notified customers in advance, which causes unnecessary loss for customers, DPP gives full refund and 10% product price compensation.
Reviews
There are no reviews yet.
Be the first to review “Customizable Marketing Button Magnet, Rectangle (1 & 10 pcs)” Cancel reply
Your email address will not be published.Required fields are marked *
Reviews
There are no reviews yet.